查看“BrookshireDollar387”的源代码

Multicasting is a important topic on your BCMSN, CCNP, and CCIE exams, and it can also be quite confusing when you 1st commence studying it. Multicasting utilizes ideas that are unlike something you have run into in your routing protocol scientific studies, and that can throw you at 1st. Visit [http://m.bizcommunity.com/View.aspx?ct=5&cst=0&i=296584&eh=uTJKA&msg=y&us=1 http://m.bizcommunity.com/View.aspx?ct=5&cst=0&i=296584&eh=uTJKA&msg=y&us=1] to learn the reason for it. I speak from experience that multicasting is like any other Cisco technology - learn the fundamentals, master the fundamentals, and then build your expertise on that foundation. One such basic is the RPF Examine, or Reverse Path Forwarding Check. A basic distinction between unicasting and multicasting is that a unicast is routed by sending it toward the destination, although a multicast is routed by sending it away from its supply. toward the destination and away from its source sound like the very same factor, but theyre not. A unicast is going to stick to a single path from source to destination. The only factor the routers care about is the destination IP address - the supply IP address isnt a aspect. With multicast routing, the destination is a multicast IP group address. I found out about [http://m.bizcommunity.com/View.aspx?ct=5&cst=0&i=296377&eh=8ybJx&msg=y&us=1 Forum] by browsing newspapers. It is the multicast routers job to make a decision which paths will lead back to the supply upstream and which paths are downstream from the source. Reverse Path Forwarding refers to the routers behavior of sending multicast packets away from the source rather than toward a particular destination. The RPF Examine is run against any incoming multicast packet. The multicast router examines the interface that the packet arrived on. In the event people desire to dig up further on [https://www.kiwibox.com/foamyfinan384/blog/entry/129257789/improve-your-traffic-by-300-degrees-from-altering-your-ar/ Improve your traffic by 300-de…  foamyfinan384], we recommend many databases people can investigate. If the packet comes in on an upstream interface - that is, an interface identified on the reverse path that leads back to the source - the packet passes the verify and will be forwarded. If the packet comes in on any other interface, the packet is dropped. The RPF Examine serves to verify the integrity of your multicasting network, and also serves as a reminder that the simple operation of multicasting is a lot various than unicasting!. Click here [https://storify.com/helpfulhints791/renewing-your-domain-name-is-important save on] to explore the inner workings of it.